- ページ 8
スイッチ Avocent SwitchViewのPDF インストーラー/ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avocent SwitchView 17 ページ。 Kvm switching solutions from your desktop
Avocent SwitchView にも： ユーザーマニュアル (17 ページ), 仕様 (4 ページ), クイック・インストール・マニュアル (8 ページ), クイック・インストール・マニュアル (2 ページ)
ページを印刷する
SwitchView
User Manual
6
Scanning PCs
The scanning feature allows you to automatically moni-
tor, or scan, each PC in your SwitchView system. If you
use the keyboard during scanning, the scan will pause
until you finish, then resume with the next PC. The
length of time each PC's video remains on the screen, or
dwell time, can be changed at any time. Scanning will
be halted if the Halt command is entered or if another
PC is selected.
The following key sequences control scanning:
Key Sequence
<CTRL><CTRL>Dnn<Enter>
<CTRL><CTRL>SG<Enter>
<CTRL><CTRL>SH<Enter>
If you would like mouse and keyboard activity to sus-
pend scanning, see the commands below.
Key Sequence
<CTRL><CTRL>M+<Enter>
<CTRL><CTRL>M-<Enter>
Key Sequence
1. <CTRL><CTRL>D10<Enter>
2. <CTRL><CTRL>SG<Enter>
3. <CTRL><CTRL>SH<Enter>
Action
Configures the dwell time. Substitute nn
with a value from 2 to 60 seconds. The
default value is 5 seconds.
Enables the scan Go command.
Enables the scan Halt command.
Action
Mouse will suspend scanning.
Mouse will not suspend scanning. (default)
EXAMPLE
Action
Each PC's video will remain on the
screen for 10 seconds before the
next channel is displayed.
Scanning begins with the current
computer, then continues to the
next PC in sequence.
Scanning is halted until the Go
command is issued again.