- ページ 14

ガスヒーター COZY BFT102 andのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。COZY BFT102 and 18 ページ。 Blue flame vent free heaters
COZY BFT102 and にも：据付・取扱説明書 (19 ページ), 据付・取扱説明書 (19 ページ)

ページを印刷する

INSTALLING THE VFB BLOWER (BFT201 / BFT202, BFT301 / BFT302 MODELS ONLY)

STEP 1. Remove blower assembly from shipping carton.

STEP 2. Insert blower assembly into upper back of heater (See Figure 11).

STEP 3. Secure blower to heater using three #8 screws (provided) through holes pre-punched in heater back.

STEP 4. Locate mounting holes for switchbox (See Figure 11).

STEP 5. Secure switchbox to heater using two #8 screws (provided).

STEP 6. Plug power cord into 115 volt three-prong grounded receptacle.

CAUTION:

Always unplug power cord before servicing or cleaning heater. This appliance is equipped with a three-

prong (grounding) plug for your rotection against shock hazard and should be plugged directly into a

properly grounded three prong receptacle.

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper

and dangerous operation. Verify proper operation after servicing.

FIGURE 11

BLOWER INSTRUCTIONS

Blower Motor

If any of the original wire supplied with

the appliance must be replaced, it must

be replaced with a wire of at least a

105

C temperature rating.

WIRING DIAGRAM / VFB BLOWER

Page 14

Switchbox

Blower Assembly

Fan

Switch

Power

Cord