温度コントローラー Aqua Logic DC115S-20のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua Logic DC115S-20 4 ページ。 Dc series single stage digital temperature control

Visit our website to see more of our products.

www.AquaLogicInc.com

Inline Titanium heaters

1 kW thru 60 kW

TLC Trimline Cyclone Drop-

in coil water chillers -1/4

and 1/3 HP

Safety water flow

cutout switches

1" thru 3" pipe

Delta-Star inline water

chillers. -1/4 thru 1-1/2 HP

Aqua Logic, Inc.

9558 Camino Ruiz.

San Diego, CA. 92126

PH: 858.292.4773

www.AquaLogicInc.com

Rev 1

DC SERIES SINGLE STAGE DIGITAL TEMPERATURE

CONTROL INSTRUCTION MANUAL

Model No. DC115S, DC115S-20 and DC230S

Thank you for purchasing our digital temperature controller. It is

designed to provide on/off control for commercial heating and cooling

applications. It is equipped with a red LED display that provides a

constant readout of the water temperature, and a touch keypad that

allows the user to easily and accurately select the setpoint

temperature, differential and heating / cooling modes of operation.

The control enclosure has an NEMA 4X rating but, if installed

outdoors, it should be protected against the direct weather.

Installation.

1. Mount control on a wall or any vertical surface that water

can't splash on it.

2. Plug-in the 115V (230V) control female plug from into the

male plug of the chiller or heater.

3. Plug-in the 115V (230V) control male plug into wall outlet.

4. Install the titanium temperature sensor in your tank or sump.

Note: For your safety, you must plug the control into a dedicated 15 or 20

Amp. GFIC (Ground Fault Interruption Circuit) circuit. When installing the

control in a wet area make sure to have the power cords with drip loops so

water does not collect around the electrical connections.