- ページ 2

計測機器 Bilanciai DD1010のPDF クイックスタートをオンラインで閲覧またはダウンロードできます。Bilanciai DD1010 2 ページ。 Weighing terminal
Bilanciai DD1010 にも: クイックスタート (4 ページ), クイックスタート (2 ページ)

Bilanciai DD1010 クイックスタート
DECLARATION OF CONFORMITY
N° dd1010_1
SOCIETÀ COOPERATIVA BILANCIAI A.R.L.
Via S. Ferrari, 16
We:
41011 Campogalliano (MO) - Italy
declare upon our sole responsibility that
the product: Electronic weighing terminal DD1010
and its options
described in this declaration, complies with the relevant harmonised
standards of the European Union
2014/30/EU (EMC) : EN 61000-6-3:2007
EN 61000-6-4 :2007
2014/35/EU (LVD) :
EN60950-1:2006
2014/31/EU (NAWI) : EN 45501:1992
The terminal is also suitable for the creation of non-automatic weighing
instruments approved with the "CE Type Approval Certificate" in
conformance with the requirements of Directive 2014/31/EU (NAWI).
The product bears CE marking.
02-05-2016
Campogalliano, this day ............................
Signed for and on behalf
of the manufacturer
WARNINGS
Do not install in environments with presence of potentially
explosive gas or powders.
This appliance cannot be disposed of as municipal solid
waste.
It must be disposed of separately.
For further information, refer to the site www.coopbilanciai.it.
SOCIETA' COOPERATIVA
BILANCIAI
Strumenti e Tecnologie per Pesare
Società Cooperativa Bilanciai Campogalliano - 41011 Campogalliano (MO) Italy
Via S. Ferrari, 16 - Tel. +39 (0)59 893 611 - Fax +39 (0)59 527 079
Web: http://www.coopbilanciai.it - E-mail:[email protected]
Customer Service Tel. +39 (0)59 893 612 - Fax +39 (0)59 527 294
5.
RcD Weighing
1
Reset the instrument.
2
Place the empty vehicle on
the weighing platform.
3
Generate entry printout.
4
Remove the vehicle from the
weighing platform.
5
Recall code RcD:
Select the newly-perfor-
med weighing operation
RcD
and press "OK".
6
Place the loaded vehicle on
the weighing platform.
7
Generate exit printout.
6.
RcP/RcA Weighing
1
Reset the instrument.
Place the loaded vehicle on
the weighing platform.
2
3
Recall code RcP (or RcA):
Select the vehicle code
and press "OK".
or (if there is no relative
RcP
code):
4
Generate exit printout.
Enter
the
vehicle
data in a new code
and confirm.
Select the new code
and press "OK".