Bilanciai DD1010 Quick Start - Page 2

Browse online or download pdf Quick Start for Measuring Instruments Bilanciai DD1010. Bilanciai DD1010 2 pages. Weighing terminal
Also for Bilanciai DD1010: Quick Start (4 pages), Quick Start (2 pages)

Print Page
Bilanciai DD1010 Quick Start
DECLARATION OF CONFORMITY
N° dd1010_1
SOCIETÀ COOPERATIVA BILANCIAI A.R.L.
Via S. Ferrari, 16
We:
41011 Campogalliano (MO) - Italy
declare upon our sole responsibility that
the product: Electronic weighing terminal DD1010
and its options
described in this declaration, complies with the relevant harmonised
standards of the European Union
2014/30/EU (EMC) : EN 61000-6-3:2007
EN 61000-6-4 :2007
2014/35/EU (LVD) :
EN60950-1:2006
2014/31/EU (NAWI) : EN 45501:1992
The terminal is also suitable for the creation of non-automatic weighing
instruments approved with the "CE Type Approval Certificate" in
conformance with the requirements of Directive 2014/31/EU (NAWI).
The product bears CE marking.
02-05-2016
Campogalliano, this day ............................
Signed for and on behalf
of the manufacturer
WARNINGS
Do not install in environments with presence of potentially
explosive gas or powders.
•
This appliance cannot be disposed of as municipal solid
waste.
•
It must be disposed of separately.
For further information, refer to the site www.coopbilanciai.it.
SOCIETA' COOPERATIVA
BILANCIAI
Strumenti e Tecnologie per Pesare
Società Cooperativa Bilanciai Campogalliano - 41011 Campogalliano (MO) Italy
Via S. Ferrari, 16 - Tel. +39 (0)59 893 611 - Fax +39 (0)59 527 079
Web: http://www.coopbilanciai.it - E-mail:[email protected]
Customer Service Tel. +39 (0)59 893 612 - Fax +39 (0)59 527 294
5.
RcD Weighing
1
Reset the instrument.
2
Place the empty vehicle on
the weighing platform.
3
Generate entry printout.
4
Remove the vehicle from the
weighing platform.
5
Recall code RcD:
•
Select the newly-perfor-
med weighing operation
RcD
and press "OK".
6
Place the loaded vehicle on
the weighing platform.
7
Generate exit printout.
6.
RcP/RcA Weighing
1
Reset the instrument.
Place the loaded vehicle on
the weighing platform.
2
3
Recall code RcP (or RcA):
•
Select the vehicle code
and press "OK".
or (if there is no relative
RcP
code):
•
•
4
Generate exit printout.
Enter
the
vehicle
data in a new code
and confirm.
Select the new code
and press "OK".