- ページ 7

配管製品 Billi 926065のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Billi 926065 7 ページ。 Dispenser options: xl and mixer tap, al
Billi 926065 にも：ユーザーマニュアル (9 ページ)

ページを印刷する

Installation and Commission Checklist

❏

Filter packing foam removed from under filter cartridge.

❏

All other packaging films and labels removed.

❏

Dispenser mounted securely. Retaining screw on rear back of dispenser re-fitted for XL dispensers.

❏

Dispenser swivels 45° in each direction if activated (locking piece removed).

❏

Tubing is cut to correct lengths and not kinked, twisted, or sagging. Red and grey silicone tubes have continuous fall.

❏

Tubing secured correctly. Silicone tubes secured with spring clamps, PE tubes fully inserted, and nuts correctly tightened.

❏

Water main flushed before connection to appliance.

❏

Appliance connected to COLD mains water supply.

❏

Sufficient clearance around unit as recommended.

❏

Power circuit fitted with an RCD (earth leakage protection device).

❏

Sawdust and any other debris cleaned out of cupboard area.

❏

Initial program settings correctly set for dispenser tube length.

❏

Time and date correctly set.

❏

Appliance heating and cooling correctly after automatic commissioning sequence. Red and blue dispenser icons flashing (or on continually when

correct temperature reached).

❏

pressure correctly set with no leaks.

❏

Sparkling water flow rate correctly set.

❏

Boiling and chilled water flow correct.

Technical support

Warranty registration

Designed and manufactured in Australia.

Billi Australia Pty Ltd has a policy of continual improvement, all details are subject to change without notice. All goods are sold subject to our published terms and conditions.

6714_BILLI_INSTALLATION GUIDE - BILLI OMNIONE_COMMERCIAL_0823

CONTACT DETAILS:

Please scan the QR code for all support information.

Billi Australia Pty Ltd

42 Lucknow Crescent, Thomastown Victoria 3074 Australia

Telephone 1800 812 321

www.billi.com.au

601316 REV01