- ページ 14

メディア・コンバーター Avonic CD500のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avonic CD500 20 ページ。
Avonic CD500 にも：クイックマニュアル (2 ページ), クイックマニュアル (2 ページ), ユーザーマニュアル (19 ページ)

ページを印刷する

Connecting the components to the CD500

Execute the following steps to connect the components to the CD500:

1. Connect all provided components (see

2. Connect both CM70-IP cameras using a CAT6x ethernet cable (NOT provided in the package contents) to

the ethernet ports at the front of the CD500. The figure below shows how to connect all components to the

back and front of the CD500.

After connecting the provided power adapter and the CAT 6 Ethernet cable, the CD500 will start automatically.

Download User Manuals

You can also download the

steps necessary to configure the CamDirector

User Manual

| www.avonic.com

Package

Contents) to the ports at the back of the CD500

for the activated modules and follow those instructions for the additional

manuals

1. RCA port (Audio Line IN)

2. RCA port (Audio Line OUT)

3. USB3.0 port

4. HDMI 2.0 a/b port

5. RS232 port (for future use)

6. RS485 port (for future use)

7. GPIO Harting, har-flexicon port

8. PSU port (to connect the provided power adapter)