Avonic CD500 사용자 설명서 - 페이지 14

{카테고리_이름} Avonic CD500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avonic CD500 20 페이지.
Avonic CD500에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 사용자 설명서 (19 페이지)

페이지 인쇄
Avonic CD500 사용자 설명서

Connecting the components to the CD500

Execute the following steps to connect the components to the CD500:
1. Connect all provided components (see
2. Connect both CM70-IP cameras using a CAT6x ethernet cable (NOT provided in the package contents) to
the ethernet ports at the front of the CD500. The figure below shows how to connect all components to the
back and front of the CD500.
After connecting the provided power adapter and the CAT 6 Ethernet cable, the CD500 will start automatically.
Download User Manuals
You can also download the
steps necessary to configure the CamDirector
User Manual
| www.avonic.com
Package
Contents) to the ports at the back of the CD500
for the activated modules and follow those instructions for the additional
manuals
.
®
1. RCA port (Audio Line IN)
2. RCA port (Audio Line OUT)
3. USB3.0 port
4. HDMI 2.0 a/b port
5. RS232 port (for future use)
6. RS485 port (for future use)
7. GPIO Harting, har-flexicon port
8. PSU port (to connect the provided power adapter)
14