- ページ 3

制御システム CP Electronics DD-LCDHSのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。CP Electronics DD-LCDHS 8 ページ。

The final column for each menu section shows which products can programmed with specific parameters.

IR cmd

Time Mins

10 seconds to 99 minutes time delay (select 0 for 10 second delay – use for commis-

sioning only).

Sens on

Sensitivity level when the detector is already operational adjustable between 1 (min.)

and 9 (max.)

Sens off

Sensitivity level for switching the detector on – adjustable between 1 (min.) and 9

(max.).

Range m

Set the detectors‟ range in metres (0-999m)

Power Up On

Select No for a 30 second delay on start up. If Yes is selected, there will be no delay on

start up and the detector will always power up detecting.

Walk test

If set, walk test mode will flash the internal LED when occupancy is detected

Disable Det

Disables detection, leaving the relay output permanently off with the dimming output

operational. This mode is used when the unit is for maintained illuminance only.

Factory default

Restores factory default settings

Use with caution

Description

4. Detector Parameter Menu

dependant

Menus

Default

Products

All

Product

All

Product

All

MWS7 only

All