- ページ 7

キッチン＆ランプ; バス備品 Billi Quadra PlusのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Billi Quadra Plus 12 ページ。 Xl, xt, xr tap options
Billi Quadra Plus にも：インストレーション・マニュアル (8 ページ), インストレーション・マニュアル (7 ページ)

ページを印刷する

User guide

Billi Quadra & Quadra Plus.

—Options

The screen displays the following options and

settings . Press

and activate or alter the required setting .

– Safety Switch: Childproof safety switch is

activated by selecting ON .

– Hot Temp Set: Hot water temperature can be

set between 80°C and 98 . 9 °C .

– Cold Temp Set: Cold water temperature can

be set between 6°C and 20°C .

– Standby Mode: Activated by selecting ON .

– Standby Time Set: Period of non-use before

standby mode is activated . Range 0 . 5 to 4 . 0

hours .

– Filter Change Help: Step-by-step graphic

instructions showing filter change procedure .

– Filter Flush: Automatic flush cycle to clean

filters after 2 days of non-use .

—Statistics

Screen displays information only .

– Hot, Cold: Temperature of boiling and chilled

water .

– Hot Cups: Total number of boiling water cups

dispensed .

– Cold Cups: Total number of cold water cups

dispensed .

– Filter Life Remaining: No . of cups or days to

go before change filter warning flashes .

– Cups this filter: Cups current filter has

dispensed .

– Start: Date unit began to be used .

– S/W: Software version installed .

—Initial Setup

For use only by the installer when setting

initial operating parameters .

and

buttons to select

Billi Filter Cartridges

The Billi Quadra and Quadra Plus feature

the Billi dual stage swing-change filtration

system . Quadra models 420 and upwards

incorporate two filter cartridges, a sediment

removal pre-filter and high quality carbon

block chemical removal post-filter . The Quadra

Compact is fitted with single dual stage filter

incorporating sediment and chemical removal

elements . All Quadra filters are manufactured

using bacteria and biofilm resistant materials

for improved water quality .

Standard filters will remove sediment

particles greater than 5 microns, as well

as chemicals, tastes and odours present

in the water supply * . Premium filters provide

better tasting water due to the high quality,

carbon chemical removal filter . Rated to

remove sediment particles greater than

1 micron, these filters have excellent chemical

absorption, removing or reducing chlorine,

volatile organic compounds (VOCs), chemicals,

tastes and odours . Special purpose filters

designed for cyst reduction and heavy metal

removal are available . Contact Billi Pty Ltd .

Use only genuine filters as designed for this

system . All drinking water filtration systems

should be flushed after a period of non-use .

Your Billi Quadra has an automatic flushing

cycle which can be activated . Refer to Options

above . After a period of non-use of more than

two days, e . g . off Saturday and Sunday, the

cold water will flow for 90 seconds

when the time switch first turns the unit

on . Alternatively, before use, lift the cold

lever and run until water flow stops,

then release the lever .

*(subject to water quality) .