Billi Quadra Plus Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Сантехніка для кухні та ванної кімнати Billi Quadra Plus. Billi Quadra Plus 12 сторінок. Xl, xt, xr tap options
Також для Billi Quadra Plus: Посібник з монтажу (8 сторінок), Посібник з монтажу (7 сторінок)
Друкувати сторінкуUser guide
Billi Quadra & Quadra Plus.
—Options
The screen displays the following options and
settings . Press
and activate or alter the required setting .
– Safety Switch: Childproof safety switch is
activated by selecting ON .
– Hot Temp Set: Hot water temperature can be
set between 80°C and 98 . 9 °C .
– Cold Temp Set: Cold water temperature can
be set between 6°C and 20°C .
– Standby Mode: Activated by selecting ON .
– Standby Time Set: Period of non-use before
standby mode is activated . Range 0 . 5 to 4 . 0
hours .
– Filter Change Help: Step-by-step graphic
instructions showing filter change procedure .
– Filter Flush: Automatic flush cycle to clean
filters after 2 days of non-use .
—Statistics
Screen displays information only .
– Hot, Cold: Temperature of boiling and chilled
water .
– Hot Cups: Total number of boiling water cups
dispensed .
– Cold Cups: Total number of cold water cups
dispensed .
– Filter Life Remaining: No . of cups or days to
go before change filter warning flashes .
– Cups this filter: Cups current filter has
dispensed .
– Start: Date unit began to be used .
– S/W: Software version installed .
—Initial Setup
For use only by the installer when setting
initial operating parameters .
and
buttons to select
Billi Filter Cartridges
The Billi Quadra and Quadra Plus feature
the Billi dual stage swing-change filtration
system . Quadra models 420 and upwards
incorporate two filter cartridges, a sediment
removal pre-filter and high quality carbon
block chemical removal post-filter . The Quadra
Compact is fitted with single dual stage filter
incorporating sediment and chemical removal
elements . All Quadra filters are manufactured
using bacteria and biofilm resistant materials
for improved water quality .
Standard filters will remove sediment
particles greater than 5 microns, as well
as chemicals, tastes and odours present
in the water supply * . Premium filters provide
better tasting water due to the high quality,
carbon chemical removal filter . Rated to
remove sediment particles greater than
1 micron, these filters have excellent chemical
absorption, removing or reducing chlorine,
volatile organic compounds (VOCs), chemicals,
tastes and odours . Special purpose filters
designed for cyst reduction and heavy metal
removal are available . Contact Billi Pty Ltd .
Use only genuine filters as designed for this
system . All drinking water filtration systems
should be flushed after a period of non-use .
Your Billi Quadra has an automatic flushing
cycle which can be activated . Refer to Options
above . After a period of non-use of more than
two days, e . g . off Saturday and Sunday, the
cold water will flow for 90 seconds
when the time switch first turns the unit
on . Alternatively, before use, lift the cold
lever and run until water flow stops,
then release the lever .
*(subject to water quality) .
7