- ページ 4

録音機器 AVP Synthesizers COSMWAVE FXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AVP Synthesizers COSMWAVE FX 9 ページ。

① VOLUME control and FX mode section.

The front panel has a volume control knob VOLUME that works as a total volume

control for all sections when turned on (Phaser  Flanger  Delay). When you

connect each effect separately, the VOLUME knob works only as a volume control

for the DELAY effect.

An FX MODE toggle switch allows you to select one of the two modes:

 MULTI - all effects are switched in series;

 INDIVIDUAL - each effect is connected separately.

To use COSMWAVE FX in MULTI mode, you must first connect a mono source to the

INPUT / MAIN jack in the PHASER section on the back of the instrument and the

output to the L OUT / MAIN R jacks in the DELAY section. The FX MODE switch must

be set in the MULTI position in order for all the sections to work together.

Note: in MULTI mode, all three INPUT knobs must be set above 0, if at least one of

the INPUT knobs is set to zero, there will be no sound at the COSMWAVE FX output!

However, You can turn the sections on and off for the combination of effects.

Rear panel