AVP Synthesizers COSMWAVE FX Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису AVP Synthesizers COSMWAVE FX. AVP Synthesizers COSMWAVE FX 9 сторінок.
Друкувати сторінку
① VOLUME control and FX mode section.
The front panel has a volume control knob VOLUME that works as a total volume
control for all sections when turned on (Phaser Flanger Delay). When you
connect each effect separately, the VOLUME knob works only as a volume control
for the DELAY effect.
An FX MODE toggle switch allows you to select one of the two modes:
MULTI - all effects are switched in series;
INDIVIDUAL - each effect is connected separately.
To use COSMWAVE FX in MULTI mode, you must first connect a mono source to the
INPUT / MAIN jack in the PHASER section on the back of the instrument and the
output to the L OUT / MAIN R jacks in the DELAY section. The FX MODE switch must
be set in the MULTI position in order for all the sections to work together.
Note: in MULTI mode, all three INPUT knobs must be set above 0, if at least one of
the INPUT knobs is set to zero, there will be no sound at the COSMWAVE FX output!
However, You can turn the sections on and off for the combination of effects.
Rear panel
www.avpsynth.com