- ページ 4

スイッチ AVPro Edge AC-CX42-AUHDのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AVPro Edge AC-CX42-AUHD 7 ページ。

IR Control:

For IR Control there is an IR Window on the front face of the device.

RS-232 Control:

In order to connect your computer to the swtich by rs-232 you need to make your own cable with one

end a phoenix connector and the other end a rs-232 port. Your computer doesn't have a rs-232 input,

get a usb converter (as shown below), and plug the usb end into any computer

EDID Management:

The BEST/EASIEST WAY to setup EDID's is to use the web interface. However, we know that

may not always be an option. Since there is no screen on the device, you will have to rely

on the LED's to complete EDID setup. Please

follow the steps below (This might take one or two tries to get used too.)

1.Press and hold both "HDBT OUTPUT" and "HDmi OUTPUT" buttons for 5 seconds.

a. All LED flash one time. You are now in EDID management state.

2.In the EDID management state, press the

"HDBT OUTPUT" button to toggle to the input you

want to set the EDID for.

3.Press the "HDmi OUTPUT" button to toggle through

the EDID index.

4. Once you land on the EDID you want to use,

press and hold the "HDmi OUTPUT" button for 3

seconds. All LEDs will flash one time indicating success

5. NOTE: When in the EDID management state, if you are inactive for 10 seconds it will

return to the normal state automatically. All LEDs flash one time.

6. NOTE 2: We have a video available online or upon request if desired. Contact us or

request at support.avproedge.com

(1=IN1, 2=IN2, 3=IN3, 4=IN4)