ページを印刷するCPI Satcom & Antenna Technologies
1.4
MECHANICAL INSTALLATION TOOLS
The hardware supplied with this antenna system is U.S. SAE standard size.
However, the sizes have been chosen to allow use with compatibly sized metric
wrenches as shown in the table below.
HARDWARE SIZE
5/16" Bolt
3/8" Bolt
Also recommended for installation:
Compass - graduated to .5°
Adjustable Wrench
Hex wrench or screwdriver (for LNB and BUC install)
1.5
FOUNDATION INTERFACE
The required interface from the foundation to the mount is 2.88" O.D. (2-1/2"
schedule 40 pipe) or a 3" O.D. x 0.25" wall (76mm O.D. x 5.0mm wall) steel pipe.
A suggested in-ground foundation is shown in Figure 1.
Also available from CPI, as options, are a kingpost pedestal mount and/or a non-
penetrating mast mount.
SAE WRENCH SIZE
1/2"
9/16"
1.2M Ku-BAND SERIES 1122
METRIC WRENCH
SIZE
13 mm
14 or 15 mm
5
4096-1000
MAXIMUM REC.
TORQUE
12 ft-lbs
(16.3 n-m)
20 ft-lbs
(27.2 n-m)