CPI 1122 Montaj Kılavuzu - Sayfa 6

Anten CPI 1122 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. CPI 1122 15 sayfaları.

CPI Satcom & Antenna Technologies

1.4

MECHANICAL INSTALLATION TOOLS

The hardware supplied with this antenna system is U.S. SAE standard size.

However, the sizes have been chosen to allow use with compatibly sized metric

wrenches as shown in the table below.

HARDWARE SIZE

5/16" Bolt

3/8" Bolt

Also recommended for installation:

Compass - graduated to .5°

Adjustable Wrench

Hex wrench or screwdriver (for LNB and BUC install)

1.5

The required interface from the foundation to the mount is 2.88" O.D. (2-1/2"

schedule 40 pipe) or a 3" O.D. x 0.25" wall (76mm O.D. x 5.0mm wall) steel pipe.

A suggested in-ground foundation is shown in Figure 1.

Also available from CPI, as options, are a kingpost pedestal mount and/or a non-

penetrating mast mount.

SAE WRENCH SIZE

1/2"

9/16"

1.2M Ku-BAND SERIES 1122

METRIC WRENCH

SIZE

13 mm

14 or 15 mm

4096-1000

MAXIMUM REC.

TORQUE

12 ft-lbs

(16.3 n-m)

20 ft-lbs

(27.2 n-m)