- ページ 6
防犯カメラ Avtech DGC1105AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avtech DGC1105A 8 ページ。 Ir bullet camera
ページを印刷する
Image
Enhancement
Advanced
CAMERA PARAMETERS
This camera series has its own configuration menu.
On the DVR live view, right click to show the DVR main menu, and select ADVANCED CONFIG
DCCS OSD MENU. Then, select the channel which connects this camera, and click SETUP to enter
the menu of camera parameters.
ADVANCED CONFIG
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
NCRECORD
DCCS
NOTIFY
EXIT
When the camera menu is entered, you'll see the keys on the bottom right corner to
move between and change those configurations.
Move between selections.
Change settings.
Call the camera parameters menu or enter the currently-selected item.
Quit the camera parameters mode.
X
BLC
HLC
ENHANCE NIGHT
IMAGE
VIDEO SYSTEM
FLIP
MIRROR
RESET DEFAULT
CH1
CH2
CH3
OSD MENU
SETUP
DCCS MENU
SETUP
F.W.
E8
DEVICE
AVT SERIES
CONNECTION
OK
Adjust the image to compensate for an area that is overpowered
by brightness because of excessive light. The image will be
properly exposed for clearness.
Note: This function is available only in the day mode.
HLC (high light compensation) is used to suppress strong
backlight for clearer images. A grey mask will be covered on the
source of the strong light.
Select ON to enhance image sharpness and clearness at night.
Select the video format: NTSC / PAL.
Select ON to flip the image 180° when necessary.
Select ON to turn the images horizontally based on your
installation situation when necessary.
Click to reset all camera settings to their default values. The
camera will reboot to complete the reset process.
CH4