- ページ 34

ノートパソコン Dell 510DのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell 510D 43 ページ。 Service manual

ページを印刷する
Dell 510D サービスマニュアル
 
9. Lift the microprocessor thermal-cooling assembly up and to the right to remove it from the system board.
 Installing the Microprocessor Thermal-Cooling Assembly
NOTICE:
Ensure that you do not trap any cables beneath the microprocessor thermal-cooling assembly when you replace it.
 
1. Slip the left side of the microprocessor thermal-cooling assembly underneath the palm rest and then place the assembly over the microprocessor.
NOTICE:
While tightening the screws, ensure that the cooler plate is no higher than the screw heads.
 
2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
1 incorrectly installed heat sink