Dell 510D Servicehandleiding - Pagina 34

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell 510D. Dell 510D 43 pagina's. Service manual

9. Lift the microprocessor thermal-cooling assembly up and to the right to remove it from the system board.

Installing the Microprocessor Thermal-Cooling Assembly

NOTICE:

Ensure that you do not trap any cables beneath the microprocessor thermal-cooling assembly when you replace it.

1. Slip the left side of the microprocessor thermal-cooling assembly underneath the palm rest and then place the assembly over the microprocessor.

NOTICE:

While tightening the screws, ensure that the cooler plate is no higher than the screw heads.

2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.

1 incorrectly installed heat sink