- ページ 24
ノートパソコン Dell Inspiron 5520のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell Inspiron 5520 40 ページ。 Dell inspiron 14r/15r notebook pc quick start guide
Dell Inspiron 5520 にも： クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), セットアップと機能情報 (12 ページ), クイック・スタート・マニュアル (18 ページ), セットアップと仕様 (27 ページ), セットアップと仕様 (28 ページ)
ページを印刷する
Installing the Display Assembly
1
Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge.
2
Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.
3
Replace the six M2.5 x 5 screws that secure the display hinges to the palm-rest assembly.
4
Adhere the tape and route the touch-screen cable through the routing guides on the fan.
5
Connect the touch-screen cable and display cable to the system board.
6
Replace the screw that secures the display-cable bracket to the system board.
7
Follow the procedures in After Working Inside Your Computer.
System board
Removing the System Board
1
Follow the procedures in
2
Remove the:
a
base cover
b
battery
c
fans
d
heatsink
e
SSD
f
memory module
NOTE:
Your computer's Service Tag is located under the system badge flap. You must enter the Service Tag in the
BIOS after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can re-
connect them correctly after you replace the system board.
3
Remove the M2x2 screw securing the metal bracket for the LVDS to the system board [1] and remove the bracket off the computer
[2]. Then, disconnect the LVDS cable from the system board [3].
24
Removing and installing components
Before Working Inside Your
Computer.