- ページ 7

ノートパソコン Dell studio XPSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell studio XPS 38 ページ。 Re-image "how-to" guide
Dell studio XPS にも：製品情報マニュアル (2 ページ), セッティング (2 ページ), セットアップマニュアル (2 ページ), 情報マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), 消費者情報 (29 ページ), セットアップ (2 ページ)

Documentation

NOTICE:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer

cover from closing properly or cause damage to the equipment.

11. Connect any cables that should be attached to the card.

See the documentation for the card for information about the card's cable connections.

12.

Close the computer

cover.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the

computer.

13. Connect your computer and devices to electrical outlets, and then turn them on.

14. Install any drivers required for the card as described in the card documentation.

Removing a PCI Card

1. Follow the instructions in

Open the computer cover.

3. Press the lever on the card retention arm and raise the retention arm.

4. If necessary, disconnect any cables connected to the card.

http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (7 of 37) [3/26/2008 3:57:09 PM]

"Before You

Begin."