- ページ 8

ノートパソコン Dell studio XPSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell studio XPS 38 ページ。 Re-image "how-to" guide
Dell studio XPS にも：製品情報マニュアル (2 ページ), セッティング (2 ページ), セットアップマニュアル (2 ページ), 情報マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), 消費者情報 (29 ページ), セットアップ (2 ページ)

Documentation

5. Grasp the card by its top corners, and ease it out of its connector.

6. If you are removing the card permanently, install a filler bracket in the empty card-slot opening.

If you need a filler bracket, contact Dell.

NOTE:

You must install filler brackets over empty card-slot openings to maintain FCC certification of the computer.

The brackets also keep dust and dirt out of your computer.

7. Lower the retention arm and press it into place, securing the card(s) in the computer.

Close the computer

cover.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the

computer.

9. Connect your computer and devices to electrical outlets, and then turn them on.

10. Remove the card's driver from the operating system.

AGP Cards

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in your

Owner's Manual.

Your Dell™ computer provides a connector for an AGP card.

Removing an AGP Card

1. Follow the instructions in

Open the computer cover.

3. Press the lever on the card retention arm and raise the retention arm.

http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (8 of 37) [3/26/2008 3:57:09 PM]

"Before You

Begin."