- ページ 16

ノートパソコン Dell Vostro 1450のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Vostro 1450 48 ページ。 Document
Dell Vostro 1450 にも：セットアップと機能情報 (9 ページ), サービスマニュアル (48 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Back to Contents Page

Processor

Removing the Processor

Replacing the Processor

WARNING:

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

surface (such as a connector on your computer).

CAUTION:

is not covered by your warranty.

CAUTION:

computer.

CAUTION:

to apply slight pressure to the center of the processor while turning the cam screw.

CAUTION:

Removing the Processor

1. Follow the instructions in

2. Remove the system board (see

3. Remove the processor heat sink assembly (see

CAUTION:

to apply slight pressure to the center of the processor while turning the cam screw.

4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.

The ZIF-socket cam screw secures the processor to the system board. Take note of the arrow on the ZIF-socket cam screw.

processor

ZIF socket

5. Use a processor extraction tool to remove the processor.

Replacing the Processor

Great user manuals database on

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

To help prevent damage to the system board, remove the main battery (see

To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press

To avoid damage to the processor, hold the screwdriver such that it is perpendicular to the processor when turning the cam screw.

Before You

Begin.

Removing the System

Removing the Processor Heat Sink

When removing the processor, pull it straight up. Be careful not to bend the pins on the processor.

To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press

pin-1 corner of processor

ZIF-socket cam screw

UserManuals.info

Removing the

Board).

Assembly).

Battery) before working inside the