- ページ 18

ノートパソコン Dell Vostro 1450のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell Vostro 1450 48 ページ。 Document
Dell Vostro 1450 にも：セットアップと機能情報 (9 ページ), サービスマニュアル (48 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Back to Contents Page

Processor Heat Sink Assembly

Removing the Processor Heat Sink Assembly

Replacing the Processor Heat Sink Assembly

WARNING:

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

CAUTION:

surface (such as a connector on your computer).

CAUTION:

computer.

CAUTION:

is not covered by your warranty.

Removing the Processor Heat Sink Assembly

1. Follow the instructions in

2. Remove the system board (see

3. Turn the system board over and loosen the seven captive spring screws that secure the processor heat sink assembly to the system board.

4. Lift the processor heat sink assembly off the system board.

captive spring screws (7)

Replacing the Processor Heat Sink Assembly

WARNING:

CAUTION:

your computer's electronic components. You can do so by touching an unpainted metal surface.

NOTE:

The original thermal pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is

replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

NOTE:

This procedure assumes that you have already removed the processor heat sink and are ready to replace it.

1. Follow the instructions in

Great user manuals database on

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

If you remove the processor heat sink from the computer when the heat sink is hot, do not touch the metal housing of the heat sink.

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

To help prevent damage to the system board, remove the main battery (see

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

Before You

Begin.

Removing the System

processor heat sink

Before working inside your computer, follow the safety instructions that shipped with your computer.

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of

Before You

Begin.

UserManuals.info

Removing the

Board).

Battery) before working inside the