- ページ 4

サーバー Dell PowerEdge 2300のPDF クイックスタート&接続をオンラインで閲覧またはダウンロードできます。Dell PowerEdge 2300 5 ページ。 Vga card installation instructions
Dell PowerEdge 2300 にも: セットアップマニュアル (2 ページ), アップグレードマニュアル (23 ページ), ラック取り付け説明書 (26 ページ), アップグレードマニュアル (24 ページ), インストレーション・インストラクション (1 ページ)

Dell PowerEdge 2300 クイックスタート&接続

Connecting to a desktop

Connecting to other devices? Check this Dell web site.
http://support.dell.com/support/edocs/acc/2300MP/en/install.htm#1
Part C: Powering On/Off
NOTE: Place projector approximately 10 feet from the screen. Turn on the projector before you
turn on the source.

Powering on procedures

1. Remove the lens cap.
2. Plug in the power cord and appropriate signal cable. The power button light will blink green.
3. Press the power. The Dell logo will be displayed for 30 seconds.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects
your source.
NOTE: If you are connecting multiple sources to the projector simultaneously or if computer is
not found, press the Source button on the remote control or control panel to select the desired
source.
Instructional Technology Department
4/22/2005
• Blue VGA cable between
computer & Video In on
projector.
• Monitor cable to Video out on
Projector.
• Power cables for all 3
components.
• USB to USB (Optional for using
some remote control features).