Dell PowerEdge 2300 Szybki start i połączenia - Strona 4

Przeglądaj online lub pobierz pdf Szybki start i połączenia dla Serwer Dell PowerEdge 2300. Dell PowerEdge 2300 5 stron. Vga card installation instructions
Również dla Dell PowerEdge 2300: Instrukcja konfiguracji (2 strony), Instrukcja aktualizacji (23 strony), Instrukcja instalacji stojaka (26 strony), Instrukcja aktualizacji (24 strony), Instrukcje instalacji (1 strony)

Connecting to a desktop

Connecting to other devices? Check this Dell web site.

http://support.dell.com/support/edocs/acc/2300MP/en/install.htm#1

Part C: Powering On/Off

NOTE: Place projector approximately 10 feet from the screen. Turn on the projector before you

turn on the source.

1. Remove the lens cap.

2. Plug in the power cord and appropriate signal cable. The power button light will blink green.

3. Press the power. The Dell logo will be displayed for 30 seconds.

4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects

your source.

NOTE: If you are connecting multiple sources to the projector simultaneously or if computer is

not found, press the Source button on the remote control or control panel to select the desired

source.

Instructional Technology Department

4/22/2005

• Blue VGA cable between

computer & Video In on

projector.

• Monitor cable to Video out on

Projector.

• Power cables for all 3

components.

• USB to USB (Optional for using

some remote control features).