- ページ 18
サーバー Dell PowerEdge 4x00 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 4x00 Series 28 ページ。 Rack installation guide
Dell PowerEdge 4x00 Series にも： ラックの設置 (37 ページ), ユーザーマニュアル (42 ページ), ラックの設置 (34 ページ), インストレーション・マニュアル (37 ページ)
ページを印刷する
1-12
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
cage-nut
installation tool
Figure 1-10. Removing a Cage Nut
Replacing the Rack Doors
CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to replace the doors by yourself.
To replace the 42-U rack's front and back doors, perform the following steps:
1.
Lift the front door into position, and align the hinges with the holes in the rack as
shown in Figure 1-3.
2.
Slide the hinges into the holes in the rack until the hinge release levers lock the
hinges into position.
3.
Verify that the hinges are latched.
4.
Close the door latch by rotating the handle counterclockwise until it stops, push
in the handle until it locks in position, and then slide the cover down over the
push button (see Figure 1-2).
5.
Repeat steps 1 through 4 to install the back door.
cage nut