Dell PowerEdge 4x00 Series Посібник з монтажу - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сервер Dell PowerEdge 4x00 Series. Dell PowerEdge 4x00 Series 28 сторінок. Rack installation guide
Також для Dell PowerEdge 4x00 Series: Встановлення в стійку (37 сторінок), Посібник користувача (42 сторінок), Встановлення в стійку (34 сторінок), Посібник з монтажу (37 сторінок)
1-12
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
cage-nut
installation tool
Figure 1-10. Removing a Cage Nut
Replacing the Rack Doors
CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to replace the doors by yourself.
To replace the 42-U rack's front and back doors, perform the following steps:
1.
Lift the front door into position, and align the hinges with the holes in the rack as
shown in Figure 1-3.
2.
Slide the hinges into the holes in the rack until the hinge release levers lock the
hinges into position.
3.
Verify that the hinges are latched.
4.
Close the door latch by rotating the handle counterclockwise until it stops, push
in the handle until it locks in position, and then slide the cover down over the
push button (see Figure 1-2).
5.
Repeat steps 1 through 4 to install the back door.
cage nut