- ページ 21
サーバー Dell PowerEdge 6600のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 6600 22 ページ。 Rack
installation guide (.pdf)
Dell PowerEdge 6600 にも： ユーザーマニュアル (28 ページ), お知らせ (14 ページ), 仕様 (2 ページ)
ページを印刷する
From the front of the rack cabinet, press in on the blue release push button, lift up,
2
and push the slide assembly approximately 1 inch back from the front vertical rail until
the mounting-bracket flange and its mounting hooks disengage from the square holes
in the front vertical rail (see Figure 1-10).
Repeat step 2 at the back of the cabinet for this slide assembly.
3
If the slide assemblies are secured with screws, remove the screws that secure the front
4
and back mounting-bracket flanges to the vertical rails.
Repeat steps 1 through 3(or step 4 if screws secure the slide assemblies) for the
5
remaining slide assembly on the other side of the rack.
Place the cable-management arm, slide assemblies, and all fastener hardware in a box.
6
Label the box as a rack installation kit for the system model you removed from the
rack.
Replacing the Rack Doors
Refer to the procedures for replacing doors in the documentation provided with your rack
cabinets.
This completes the tower conversion of your system.
Rac k - t o -To w e r C o n v e r s io n G u i d e
1-17