- ページ 43

サーバー Dell PowerEdge C6100のPDF インストラクションの使用をオンラインで閲覧またはダウンロードできます。Dell PowerEdge C6100 48 ページ。 Poweredge series
Dell PowerEdge C6100 にも：ポートフォリオ・マニュアル (27 ページ)

ページを印刷する

Appendix

SSH/Telenet Enable and Disable

•

Reserved extended configuration (NetFn: 30H CMD:01H)

•

Set/Get extended configuration (NetFn: 30H CMD:03H/02H)

Table 1-34. Configuration ID = 04h, Security

Attribute

Service Disabled 1

Examples:

Get SSH/Telnet enable status:

•

Reserved extended configuration:

ipmitool 0x30 0x01

Response: 0x01 (Reservation ID)

•

Get extended configuration:

ipmitool 0x30 0x02 0x01 0x04 0x01 0x00 0x00 0x00 0xFF

Response: 0x04 0x01 0x00 0x01 0x08 (SSH/Telnet disabled)

Size Description

Disable or enable services. This attribute takes precedence over

the individual enabled/disabled feature. Once a service has

been disabled, the BMC must not allow the user to enable the

corresponding feature, and the D5h completion code must be

returned.

For example, if HTTP/HTTPS is disabled, the user is not

allowed to enable the web server through the web server

configuration (configuration ID 0Ch). In other words, the web

server can only be disabled or enabled when HTTP/HTTPS is

enabled.

[0] — All service except IPMI is disabled. This bit takes

precedence over other bits. Default is 0.

[1] — KVM/Virtual Storage, enabled by default.

[2] — HTTP/HTTPS, enabled by default.

[3] — SSH/Telnet, disabled by default.

Using the Baseboard Management Controller