Dell PowerEdge C6100 Інструкція з використання - Сторінка 43
Переглянути онлайн або завантажити pdf Інструкція з використання для Сервер Dell PowerEdge C6100. Dell PowerEdge C6100 48 сторінок. Poweredge series
Також для Dell PowerEdge C6100: Посібник з портфоліо (27 сторінок)
Друкувати сторінку
Appendix
SSH/Telenet Enable and Disable
•
Reserved extended configuration (NetFn: 30H CMD:01H)
•
Set/Get extended configuration (NetFn: 30H CMD:03H/02H)
Table 1-34. Configuration ID = 04h, Security
Attribute
ID
Service Disabled 1
Examples:
Get SSH/Telnet enable status:
•
Reserved extended configuration:
ipmitool 0x30 0x01
Response: 0x01 (Reservation ID)
•
Get extended configuration:
ipmitool 0x30 0x02 0x01 0x04 0x01 0x00 0x00 0x00 0xFF
Response: 0x04 0x01 0x00 0x01 0x08 (SSH/Telnet disabled)
Size Description
1
Disable or enable services. This attribute takes precedence over
the individual enabled/disabled feature. Once a service has
been disabled, the BMC must not allow the user to enable the
corresponding feature, and the D5h completion code must be
returned.
For example, if HTTP/HTTPS is disabled, the user is not
allowed to enable the web server through the web server
configuration (configuration ID 0Ch). In other words, the web
server can only be disabled or enabled when HTTP/HTTPS is
enabled.
[0] — All service except IPMI is disabled. This bit takes
precedence over other bits. Default is 0.
[1] — KVM/Virtual Storage, enabled by default.
[2] — HTTP/HTTPS, enabled by default.
[3] — SSH/Telnet, disabled by default.
Using the Baseboard Management Controller
43