- ページ 19

ストレージ Dell EqualLogic FS7610のPDF ハードウェア取扱説明書をオンラインで閲覧またはダウンロードできます。Dell EqualLogic FS7610 32 ページ。 Appliances
Dell EqualLogic FS7610 にも：概要 (7 ページ), インストールとセットアップマニュアル (46 ページ)

ページを印刷する

Dell EqualLogic FS7610 Hardware Owner's Manual

5. Pull the bail away from the controller and slide the transceiver out of the controller.

Installing an SFP+ Tranceiver

1. Position the transceiver so that its key is oriented correctly to the port.

2. Gently insert the transceiver into the port until it is firmly seated and the latching mechanism clicks. If the

transceiver does not slide in easily, make sure the key is in the correct position.

3. Align a network cable with the transceiver port and insert the cable. Cables are keyed so they can only be

inserted correctly.

4. Bring the appliance back online to check the connections.

Replacing a Power Supply

The FS7610 NAS appliance contains two hot-swappable 717W AC power supply modules. If one supply fails,

you can replace it while the appliance remains online.

Although the appliance continues to function with only one working power supply, Dell recommends that

you replace a failed power supply as soon as possible. The second power supply ensures continued

operation and high availability in the event of a power or power supply failure.

Removing a Power Supply

1. Disconnect the power cord from the power source, then disconnect the other end from the failed power

supply. Remove the cord from the strain relief strap.

2. Press the release latch (callout 1 in

Figure 9: Removing a Transceiver

Figure

10) and slide the power supply out of the appliance (callout 2).

2 Replacing Components