- ページ 10
ストレージ Dell EqualLogic PS SeriesのPDF ハードウェア取扱説明書をオンラインで閲覧またはダウンロードできます。Dell EqualLogic PS Series 48 ページ。 Storage arrays
Dell EqualLogic PS Series にも： セッティング (2 ページ), ハードウェア取扱説明書 (50 ページ), ハードウェア・メンテナンス (46 ページ)
ページを印刷する
PS6210 Hardware Owner's Manual
Figure 4: Front-Panel Features and Indicators (2U Array)
Figure 5: Front-Panel Features and Indicators (4U Array)
Item Indicator
Icon
Array status
1
LED
2
Power LED
Drive release
3
None
latch
The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced
only by support personnel. During the array power-up sequence, these LEDs will cycle through
different states until the array is fully started and the active control module has been determined.
Back-Panel Features and Indicators
The back of a PS6210 with AC power is shown in
Table 2
describes the back-panel features.
4
Table 1: Front-Panel Feature Descriptions
Description
The array status LED lights when the array power is on.
•
Off—No power.
•
Steady blue—Array status is OK.
•
Slow blinking blue—Array status is Standby mode.
•
Blinking blue—Administrator request to identify the array (see the Group
Manager online help).
•
Steady amber—Critical status.
•
Blinking amber—Warning.
The power LED is ON when at least one power supply is supplying power to
the array.
•
Off—No power, or the array is in Standby mode.
•
Steady green—Array has at least one power supply providing power, and
array is not in Standby mode.
Enables you to remove a drive from the array.
1 Basic Storage Array Information
Figure 6
and
Figure
7.