Dell EqualLogic PS Series Hardware Gebruikershandleiding - Pagina 10
Blader online of download pdf Hardware Gebruikershandleiding voor {categorie_naam} Dell EqualLogic PS Series. Dell EqualLogic PS Series 48 pagina's. Storage arrays
Ook voor Dell EqualLogic PS Series: Instellen (2 pagina's), Hardware Gebruikershandleiding (50 pagina's), Onderhoud van hardware (46 pagina's)
Pagina afdrukken
PS6210 Hardware Owner's Manual
Figure 4: Front-Panel Features and Indicators (2U Array)
Figure 5: Front-Panel Features and Indicators (4U Array)
Item Indicator
Icon
Array status
1
LED
2
Power LED
Drive release
3
None
latch
The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced
only by support personnel. During the array power-up sequence, these LEDs will cycle through
different states until the array is fully started and the active control module has been determined.
Back-Panel Features and Indicators
The back of a PS6210 with AC power is shown in
Table 2
describes the back-panel features.
4
Table 1: Front-Panel Feature Descriptions
Description
The array status LED lights when the array power is on.
•
Off—No power.
•
Steady blue—Array status is OK.
•
Slow blinking blue—Array status is Standby mode.
•
Blinking blue—Administrator request to identify the array (see the Group
Manager online help).
•
Steady amber—Critical status.
•
Blinking amber—Warning.
The power LED is ON when at least one power supply is supplying power to
the array.
•
Off—No power, or the array is in Standby mode.
•
Steady green—Array has at least one power supply providing power, and
array is not in Standby mode.
Enables you to remove a drive from the array.
1 Basic Storage Array Information
Figure 6
and
Figure
7.