- ページ 6

ストレージ Dell PowerEdge 4400のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 4400 36 ページ。 Wake-on-lan (wol) support on dell servers
Dell PowerEdge 4400 にも：インストレーション・マニュアル (42 ページ), インストレーション・マニュアル (20 ページ), インストレーション・マニュアル (28 ページ), ラックの設置 (37 ページ), 更新マニュアル (8 ページ), 情報更新 (8 ページ), ユーザーマニュアル (42 ページ), ラックの設置 (34 ページ), ハードウェア・インストール・マニュアル (40 ページ), マニュアル (15 ページ)

1-2

Dell PowerEdge Systems — Installing the External Drive Bay

Installing a SCSI Hard-Disk Drive in the External

Drive Bay

To install a SCSI hard-disk drive in the external drive bay, use the following procedure:

Locate the four mounting holes on each side of the external drive bay. Align a rail

bracket with the set of holes that, when the rail is installed, places the rail closer

to the front of the external drive bay.

Secure a rail bracket to the left and right sides of the external drive bay using the

screws provided (see Figure 1-1).

Attach the hard-disk drive to the drive carrier.

With the drive carrier laying flat, place the hard-disk drive right-side up on the

carrier with the front of the drive directly behind the carrier handle and the

drive connector on the end of the carrier.

Secure the hard-disk drive to the drive carrier with four screws inserted

through the sides of the carrier.

Align the edge of the drive carrier with the notches in the drive bay assembly and

slide the carrier into the assembly as shown in Figure 1-1.

external drive-bay

assembly with rail

brackets attached

SCSI hard-disk

drive in a drive

carrier

flush-mount

screw

NOTE: The shroud is removed from the drive bay for clarity.

Figure 1-1. Installing the External Drive-Bay and Hard-Disk Drive

Carrier

Close the drive carrier handle to lock the drive in place.

Repeat steps 3 through 5 to install a second drive in the assembly.

drive carrier

handle

drive-carrier

locking bar