- ページ 6

ストレージ Dell PowerEdge R520のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge R520 11 ページ。 2-socket, 2u rack server
Dell PowerEdge R520 にも：インストレーション・マニュアル (8 ページ), スタートマニュアル (9 ページ), ポートフォリオ・マニュアル (27 ページ), テクニカル・マニュアル (50 ページ)

Cable Routing Procedures for the Dell PowerEdge R520 System

Figure 4.

1.3.2. Left-side mounting instructions

1. Install the CMA on the rear left side of the rails by attaching both CMA housings to the attachment

brackets on the rails.

2. Route the cables through the CMA while avoiding twisting the cables. Use the hook-and-loop straps

on the CMA to secure the cables.

3. If the cable bundle includes a keyboard, video, and mouse system interface pod (KVM SIP), it can

be placed inside the CMA basket when the CMA is mounted on the left side. See Figure 5.

4. Once you have routed all of the cables through the CMA, dress the cable slack between the back of

the system and the entrance of the CMA using the tie wraps provided in the CMA kit.

5. Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wraps

are positioned so as to avoid interference with adjacent systems. Return the CMA to the closed

(retracted) position.

Attaching the inner CMA attachment bracket

Figure 5.

Routing the cables through the CMA

NOTE: Do not store excess cable

slack inside the CMA. The cables

may protrude through the CMA, thus

causing binding and potentially

damaging the cables.

Cables entering the CMA should have a

small amount of slack to avoid cable

strain when the CMA is extended.

KVM SIP can be placed inside the

basket when the CMA is mounted on

the left side.