- ページ 14

ストレージ Dell PowerVault 200SのPDF 交換取扱説明書をオンラインで閲覧またはダウンロードできます。Dell PowerVault 200S 14 ページ。 Dell powervault 20xs storage systems enclosure services expander module installation
Dell PowerVault 200S にも：ラック設置マニュアル (26 ページ), マニュアル (9 ページ), 更新 (4 ページ), 構成 (2 ページ), インストレーション・マニュアル (48 ページ)

ページを印刷する

Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions

lock bar

Figure 14. Installing the Lock Bar (System Shown with a Removable

Lock Bar)

5. Place the key in the keylock and turn it to the locked position. Remove the

key from the keylock.

SCSI Backplane Board Replacement Completion

NOTE: For information on installation, cabling, and powering on the storage

system, see the Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems

Installation and Service Guide.

After replacing the SCSI backplane board, complete the procedure by perform-

ing the following steps:

1. Install the storage system in the rack from which it was removed. If the

storage system was used in a stand-alone configuration, install the storage

system in the stand-alone enclosure.

2. Connect the communication cable(s) coming from the host computer to

the storage system.

3. Connect the power cable(s) from the storage system to the power

source(s).

4. Turn on the storage system.

key lock