Dell PowerVault 200S 교체 지침 매뉴얼 - 페이지 14
{카테고리_이름} Dell PowerVault 200S에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 200S 14 페이지. Dell powervault 20xs storage systems enclosure services
expander module installation
Dell PowerVault 200S에 대해서도 마찬가지입니다: 랙 설치 매뉴얼 (26 페이지), 매뉴얼 (9 페이지), 업데이트 (4 페이지), 구성 (2 페이지), 설치 매뉴얼 (48 페이지)

14
Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions
.
lock bar
Figure 14. Installing the Lock Bar (System Shown with a Removable
Lock Bar)
5. Place the key in the keylock and turn it to the locked position. Remove the
key from the keylock.
SCSI Backplane Board Replacement Completion
NOTE: For information on installation, cabling, and powering on the storage
system, see the Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems
Installation and Service Guide.
After replacing the SCSI backplane board, complete the procedure by perform-
ing the following steps:
1. Install the storage system in the rack from which it was removed. If the
storage system was used in a stand-alone configuration, install the storage
system in the stand-alone enclosure.
2. Connect the communication cable(s) coming from the host computer to
the storage system.
3. Connect the power cable(s) from the storage system to the power
source(s).
4. Turn on the storage system.
key lock