- ページ 18

ストレージ Dell PowerVault 715NのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault 715N 44 ページ。 Network attached storage
Dell PowerVault 715N にも：アップデート手順 (4 ページ), ユーザーマニュアル (31 ページ)

ページを印刷する

4. Insert the replacement hard drive into the carrier and install the screws you removed in step 2a to secure the drive.

NOTICE:

Ensure that the hard drive's power cables do not extend beyond the outside (left) edge of the carrier,

which might cause damage to the wires.

5. Open the handle on the carrier and install the replacement hard drive and carrier into its slot in the drive bay (see

Figure

4).

6. Close the handle until it engages the front panel, locking the drive in place.

Replace the

bezel.

8. Run the

system diagnostics

9. Follow the appropriate procedure for restoring your data and adding mirrors in the section, "Managing Hard Drives"

in the System Administrator's Guide.

Control Panel Board

Figure

6, the control panel is shown removed from the system chassis.

Figure 6. Control Panel Removal

2 Power connector

3 Interface cable

4 Hard-drive carrier

5 Screws (4)

to test and prepare the new drive.

1 6-32 x 0.25-inch Phillips screw (3)

2 Midplane connector (JP5)

3 Ribbon cable connector

4 Control panel board