- ページ 8
ストレージ Dell PowerVault 725NのPDF ファームウェア・アップデートをオンラインで閲覧またはダウンロードできます。Dell PowerVault 725N 12 ページ。 Nas systems with software raid
Dell PowerVault 725N にも： 更新マニュアル (10 ページ), 情報更新 (28 ページ)
ページを印刷する
On the keyboard connected to the NAS system, press <F2> immediately after you see
15
the following message:
Press <F2> to enter the Function Select menu.
From the menu, select option 4, Reinstallation, and then type y to confirm the
16
selection.
This setup process might take several minutes.
When the screen warns that you are going to update the firmware, type y.
17
Press y again to confirm the selection.
18
When the screen prompts you to reboot your NAS system, do so.
19
The SCSI firmware update is complete.
Using a Client System Running Windows 2000 on the Same Network
If you have a client system running Windows 2000 on the same network, you can update
the SCSI firmware whether the network does or does not have a DHCP server.
Requirements
•
Client system running Windows 2000 (Professional or Server Family) with a diskette
drive and a CD drive on the same subnet as the NAS system
•
Resource CD included with your NAS system
•
Range of available IP addresses
Procedure
To update your firmware, perform the following steps:
Shut down the NAS system, and do not turn it back on until instructed.
1
Turn off the client system running Windows 2000, if it is running.
2
Connect a keyboard, monitor, and mouse to the NAS system.
3
For information about system connectors, see your User's Guide.
Turn on the client system running Windows 2000.
4
Log in to the client system with an account that has administrator privileges.
5
1-6
Upgrading Yo ur 39160 SC SI Card Fi r m ware