Dell PowerVault 725N Atualização do firmware - Página 8
Procurar online ou descarregar pdf Atualização do firmware para Armazenamento Dell PowerVault 725N. Dell PowerVault 725N 12 páginas. Nas systems with software raid
Também para Dell PowerVault 725N: Manual de atualização (10 páginas), Atualização da informação (28 páginas)
Imprimir página
On the keyboard connected to the NAS system, press <F2> immediately after you see
15
the following message:
Press <F2> to enter the Function Select menu.
From the menu, select option 4, Reinstallation, and then type y to confirm the
16
selection.
This setup process might take several minutes.
When the screen warns that you are going to update the firmware, type y.
17
Press y again to confirm the selection.
18
When the screen prompts you to reboot your NAS system, do so.
19
The SCSI firmware update is complete.
Using a Client System Running Windows 2000 on the Same Network
If you have a client system running Windows 2000 on the same network, you can update
the SCSI firmware whether the network does or does not have a DHCP server.
Requirements
•
Client system running Windows 2000 (Professional or Server Family) with a diskette
drive and a CD drive on the same subnet as the NAS system
•
Resource CD included with your NAS system
•
Range of available IP addresses
Procedure
To update your firmware, perform the following steps:
Shut down the NAS system, and do not turn it back on until instructed.
1
Turn off the client system running Windows 2000, if it is running.
2
Connect a keyboard, monitor, and mouse to the NAS system.
3
For information about system connectors, see your User's Guide.
Turn on the client system running Windows 2000.
4
Log in to the client system with an account that has administrator privileges.
5
1-6
Upgrading Yo ur 39160 SC SI Card Fi r m ware