- ページ 21

ストレージ Dell PowerVault MD3200 SeriesのPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3200 Series 38 ページ。 Storage arrays
Dell PowerVault MD3200 Series にも： 更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), サポート・マトリックス (12 ページ), インストレーション・マニュアル (18 ページ), 情報更新 (1 ページ), サポート・マトリックス (17 ページ), テクニカルマニュアルブック (40 ページ), ホワイトペーパー (22 ページ), 配備マニュアル (38 ページ), 配備マニュアル (38 ページ)

ページを印刷する
Dell PowerVault MD3200 Series 配備マニュアル
Using MDSM, update the storage array RAID controller module
b
firmware and NVSRAM to the latest versions available at
support.dell.com. In the Enterprise Management Window (EMW),
Click Tools Upgrade RAID Controller Module Firmware.
4 Stop all I/O and turn off the system.
Stop all I/O to the array and turn off the host systems attached to the
a
storage array.
Turn off the storage array.
b
Turn off the expansion enclosure(s) in the affected system.
c
5 Cable the expansion enclosure(s) to the storage array.
6 Turn on attached units:
Turn on the expansion enclosure(s). Wait for the enclosure status
a
LED to light blue.
Turn on the storage array and wait for the status LED to indicate that
b
the unit is ready:
•
If the status LEDs light solid amber, the storage array is still
coming online.
•
If the status LEDs are blinking amber, there is an error that can be
viewed using the MDSM.
•
If the status LEDs light solid blue, the storage array is ready.
After the storage array is online and ready, turn on any attached host
c
systems.
7 After the PowerVault MD1200 Series expansion enclosure is configured as
an expansion enclosure of the storage array, restore the data that was
backed up in step 1.
After the PowerVault MD1200 Series expansion enclosures are online, they
can be accessed as a part of the storage array.
Hardware Installation
21