Dell PowerVault MD3200 Series 배포 매뉴얼 - 페이지 21

{카테고리_이름} Dell PowerVault MD3200 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3200 Series 38 페이지. Storage arrays
Dell PowerVault MD3200 Series에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 지원 매트릭스 (12 페이지), 설치 매뉴얼 (18 페이지), 정보 업데이트 (1 페이지), 지원 매트릭스 (17 페이지), 기술 매뉴얼북 (40 페이지), 백서 (22 페이지), 배포 매뉴얼 (38 페이지), 배포 매뉴얼 (38 페이지)

페이지 인쇄
Dell PowerVault MD3200 Series 배포 매뉴얼
Using MDSM, update the storage array RAID controller module
b
firmware and NVSRAM to the latest versions available at
support.dell.com. In the Enterprise Management Window (EMW),
Click Tools Upgrade RAID Controller Module Firmware.
4 Stop all I/O and turn off the system.
Stop all I/O to the array and turn off the host systems attached to the
a
storage array.
Turn off the storage array.
b
Turn off the expansion enclosure(s) in the affected system.
c
5 Cable the expansion enclosure(s) to the storage array.
6 Turn on attached units:
Turn on the expansion enclosure(s). Wait for the enclosure status
a
LED to light blue.
Turn on the storage array and wait for the status LED to indicate that
b
the unit is ready:
•
If the status LEDs light solid amber, the storage array is still
coming online.
•
If the status LEDs are blinking amber, there is an error that can be
viewed using the MDSM.
•
If the status LEDs light solid blue, the storage array is ready.
After the storage array is online and ready, turn on any attached host
c
systems.
7 After the PowerVault MD1200 Series expansion enclosure is configured as
an expansion enclosure of the storage array, restore the data that was
backed up in step 1.
After the PowerVault MD1200 Series expansion enclosures are online, they
can be accessed as a part of the storage array.
Hardware Installation
21