- ページ 18

ストレージ Dell PowerVault MD3200i SeriesのPDF テクニカルマニュアルブックをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3200i Series 38 ページ。 Storage arrays
Dell PowerVault MD3200i Series にも：配備マニュアル (41 ページ), 更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), ユーザーマニュアル (46 ページ), サポート・マトリックス (12 ページ), インストレーション・マニュアル (18 ページ), 情報更新 (1 ページ), サポート・マトリックス (11 ページ), サポート・マトリックス (17 ページ), ホワイトペーパー (22 ページ), マニュアル (16 ページ)

DELL PowerVault MD3200i/MD3220i Technical Guide Book

Drive-Status Indicator Pattern

(RAID Only)

Blinks green three seconds, amber

three seconds, and off six seconds.

Storage Capacity Expansion

Both the MD3200i and MD3220i systems are capable of supporting up to 96 total hard drives. Adding

additional drives past what the base platforms hold is a simple matter of connecting either MD1200

and/or MD1220 JBODs to the expansion ports on the MD3200i series of arrays. Users can mix and match

the MD1200 (3.5" HDD enclosure) and the MD1220 (2.5" HDD enclosure) in any combination that

provides them the best mix of drives for their environment as long as they don't exceed a total of 96

drive slots. The diagram below shows the proper way to cable JBODs to the MD3200i series of storage

arrays.

If using 100% MD1200 enclosures for storage expansion on an MD3200i a total of seven MD1200

enclosures can be added to achieve a total of 96 HDD. If using 100% MD1220 enclosures for expansion

on an MD3200i, a total of three MD1220 enclosures can be connected. Adding three MD1220 enclosures

provides a total of 84 HDD slots.

If using 100% MD1220 enclosures for storage expansion on an MD3220i, a total of three MD1220

enclosures can be added to achieve a total of 96 HDD. If using 100% MD1200 enclosures for expansion

on an MD3220i, a total of six MD1200 enclosures can be added to achieve a total of 96 HDD.

It is important to note that the older 3Gb SAS JBODS (MD1000 and MD1120) cannot be used as expansion

enclosures on the MD3200i or the MD3220i.

Rebuild aborted

Condition