Dell PowerVault MD3200i Series 기술 매뉴얼북 - 페이지 18

{카테고리_이름} Dell PowerVault MD3200i Series에 대한 기술 매뉴얼북을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3200i Series 38 페이지. Storage arrays
Dell PowerVault MD3200i Series에 대해서도 마찬가지입니다: 배포 매뉴얼 (41 페이지), 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 사용자 설명서 (46 페이지), 지원 매트릭스 (12 페이지), 설치 매뉴얼 (18 페이지), 정보 업데이트 (1 페이지), 지원 매트릭스 (11 페이지), 지원 매트릭스 (17 페이지), 백서 (22 페이지), 매뉴얼 (16 페이지)

DELL PowerVault MD3200i/MD3220i Technical Guide Book

Drive-Status Indicator Pattern

(RAID Only)

Blinks green three seconds, amber

three seconds, and off six seconds.

Storage Capacity Expansion

Both the MD3200i and MD3220i systems are capable of supporting up to 96 total hard drives. Adding

additional drives past what the base platforms hold is a simple matter of connecting either MD1200

and/or MD1220 JBODs to the expansion ports on the MD3200i series of arrays. Users can mix and match

the MD1200 (3.5" HDD enclosure) and the MD1220 (2.5" HDD enclosure) in any combination that

provides them the best mix of drives for their environment as long as they don't exceed a total of 96

drive slots. The diagram below shows the proper way to cable JBODs to the MD3200i series of storage

arrays.

If using 100% MD1200 enclosures for storage expansion on an MD3200i a total of seven MD1200

enclosures can be added to achieve a total of 96 HDD. If using 100% MD1220 enclosures for expansion

on an MD3200i, a total of three MD1220 enclosures can be connected. Adding three MD1220 enclosures

provides a total of 84 HDD slots.

If using 100% MD1220 enclosures for storage expansion on an MD3220i, a total of three MD1220

enclosures can be added to achieve a total of 96 HDD. If using 100% MD1200 enclosures for expansion

on an MD3220i, a total of six MD1200 enclosures can be added to achieve a total of 96 HDD.

It is important to note that the older 3Gb SAS JBODS (MD1000 and MD1120) cannot be used as expansion

enclosures on the MD3200i or the MD3220i.

Rebuild aborted

Condition