- ページ 18

ストレージ Dell PowerVault MD3420のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3420 47 ページ。 Storage arrays
Dell PowerVault MD3420 にも：スタートマニュアル (8 ページ), 配備マニュアル (27 ページ)

ページを印刷する

Secure the bezel with the keylock.

Physical Drives

SAFETY Models AMT E03J and E04J

Models AMT, E03J, and E04J are intended for installation only in restricted access locations as defined in

cl 1.2.7.3 of IEC 60950-1:2005.

Depending on your configuration, your array either supports up to twenty-four 2.5-inch SAS physical

drives or up to twelve 3.5-inch SAS physical drives in internal drive bays. Physical drives are connected to

a backplane through physical-drive carriers and can be configured as hot-swappable.

Removing a 2.5 Inch Physical-Drive Blank

CAUTION: To maintain proper system cooling, all empty physical-drive slots must have physical-

drive blanks installed.

If installed, remove the front bezel.

Press the release button and slide the physical-drive blank out until it is free of the physical-drive slot.

Figure 9. Removing and Installing a 2.5 Inch Physical-Drive Blank (MD3420 only)

physical-drive blank

Installing a 2.5 Inch Physical-Drive Blank

If installed, remove the front bezel.

Insert the physical-drive blank into the physical-drive slot until the release button clicks into place.

If applicable, install the front bezel.

Removing a 3.5 Inch Physical-Drive Blank

CAUTION: To maintain proper system cooling, all empty hard-drive slots must have drive blanks

installed.

If installed, remove the front bezel.

Press the release button and slide the physical-drive blank out until it is free from the physical-drive

slot.

release button