- ページ 14

ストレージ Dell PowerVault NX1950のPDF アップグレードマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault NX1950 18 ページ。 For vmware esx server software
Dell PowerVault NX1950 にも：配備マニュアル (34 ページ), 重要事項説明書 (26 ページ), はじめに (49 ページ), 設置およびトラブルシューティング・マニュアル (48 ページ), 配備マニュアル (38 ページ), リファレンス・マニュアル (4 ページ), セッティング (2 ページ), 使用 (2 ページ), 設定マニュアル (11 ページ)

Creating a Target in a Non-Clustered Environment

Perform the following steps to re-create the Targets and re-assign the .vhd files

in a non-clustered environment:

1 Perform the following steps to configure the iSCSI Initiator to discover

the Target:

In the Discovery tab of the iSCSI Initiator, add the IP address of the

newly created highly available iSCSI instance. Click Advanced and

configure the following properties:

•

Local Adapter—Microsoft iSCSI Initiator

•

Source IP—IP address of the client for iSCSI traffic

If you are using iSNS server, right-click on iSCSI Target icon in

Microsoft Management Console→ Properties→ iSNS tab and add

iSNS IP address.

Go to Initiator and add iSNS IP address in the Discovery tab.

2 To configure the Target, perform the following:

Right-click the Target icon in the Microsoft Management Console

and click Create iSCSI Target.

Enter the Target name, Target description, and click Next.

Browse for desired IQN identifier or click Advanced→ Add→ IP address

and enter the IP address of the Initiator. Click Next.

Select the desired Target from the drop-down menu and click Next.

Click Finish. The Target is successfully created.

Configuring 3.1 Target