Dell PowerVault NX1950 업그레이드 매뉴얼 - 페이지 14

{카테고리_이름} Dell PowerVault NX1950에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault NX1950 18 페이지. For vmware esx server software
Dell PowerVault NX1950에 대해서도 마찬가지입니다: 배포 매뉴얼 (34 페이지), 중요 정보 매뉴얼 (26 페이지), 시작하기 (49 페이지), 설치 및 문제 해결 매뉴얼 (48 페이지), 배포 매뉴얼 (38 페이지), 참조 매뉴얼 (4 페이지), 설정 (2 페이지), 사용 (2 페이지), 구성 매뉴얼 (11 페이지)

Creating a Target in a Non-Clustered Environment

Perform the following steps to re-create the Targets and re-assign the .vhd files

in a non-clustered environment:

1 Perform the following steps to configure the iSCSI Initiator to discover

the Target:

In the Discovery tab of the iSCSI Initiator, add the IP address of the

newly created highly available iSCSI instance. Click Advanced and

configure the following properties:

•

Local Adapter—Microsoft iSCSI Initiator

•

Source IP—IP address of the client for iSCSI traffic

If you are using iSNS server, right-click on iSCSI Target icon in

Microsoft Management Console→ Properties→ iSNS tab and add

iSNS IP address.

Go to Initiator and add iSNS IP address in the Discovery tab.

2 To configure the Target, perform the following:

Right-click the Target icon in the Microsoft Management Console

and click Create iSCSI Target.

Enter the Target name, Target description, and click Next.

Browse for desired IQN identifier or click Advanced→ Add→ IP address

and enter the IP address of the Initiator. Click Next.

Select the desired Target from the drop-down menu and click Next.

Click Finish. The Target is successfully created.

Configuring 3.1 Target