Dell PowerVault NX1950 업그레이드 매뉴얼 - 페이지 15

{카테고리_이름} Dell PowerVault NX1950에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault NX1950 18 페이지. For vmware esx server software
Dell PowerVault NX1950에 대해서도 마찬가지입니다: 배포 매뉴얼 (34 페이지), 중요 정보 매뉴얼 (26 페이지), 시작하기 (49 페이지), 설치 및 문제 해결 매뉴얼 (48 페이지), 배포 매뉴얼 (38 페이지), 참조 매뉴얼 (4 페이지), 설정 (2 페이지), 사용 (2 페이지), 구성 매뉴얼 (11 페이지)

페이지 인쇄
Dell PowerVault NX1950 업그레이드 매뉴얼
3 Import devices by performing the following:
Right-click the Devices icon in the Microsoft Management Console
a
and select Import Virtual Disk. Click Next.
Browse to the volume the .vhd files are located on. Select the .vhd file,
b
click OK.
Click Next and then click Finish.
c
Repeat step b and step c to import all .vhd files.
d
4 Create Virtual Disk-Target Associations by performing the following:
Right-click the Target and select Add existing virtual disk.
a
Select the virtual disk that you want to configure and click OK.
b
The virtual disk in associated to the Target and ready for use.
However, the storage disks are not ready for use. To resume usage of the
disks from the Initiator:
Go to the Host or Initiator and log on to the Targets that you created.
a
Go to disk management and verify that the disk is accessible and is
b
displayed as Healthy. If the disk is not active, right-click on the
volumes and click Reactivate.

Unsupported Configurations

Using the 3.0 and 3.1 Targets together in the same cluster configuration is not
supported.
Configuring 3.1 Target
15