Dell PowerVault NX1950 Upgrade Manual - Page 15

Browse online or download pdf Upgrade Manual for Storage Dell PowerVault NX1950. Dell PowerVault NX1950 18 pages. For vmware esx server software
Also for Dell PowerVault NX1950: Deployment Manual (34 pages), Important Information Manual (26 pages), Getting Started (49 pages), Installation And Troubleshooting Manual (48 pages), Deployment Manual (38 pages), Reference Manual (4 pages), Setting Up (2 pages), Using (2 pages), Configuration Manual (11 pages)

Print Page

3 Import devices by performing the following:

Right-click the Devices icon in the Microsoft Management Console

and select Import Virtual Disk. Click Next.

Browse to the volume the .vhd files are located on. Select the .vhd file,

click OK.

Click Next and then click Finish.

Repeat step b and step c to import all .vhd files.

4 Create Virtual Disk-Target Associations by performing the following:

Right-click the Target and select Add existing virtual disk.

Select the virtual disk that you want to configure and click OK.

The virtual disk in associated to the Target and ready for use.

However, the storage disks are not ready for use. To resume usage of the

disks from the Initiator:

Go to the Host or Initiator and log on to the Targets that you created.

Go to disk management and verify that the disk is accessible and is

displayed as Healthy. If the disk is not active, right-click on the

volumes and click Reactivate.

Unsupported Configurations

Using the 3.0 and 3.1 Targets together in the same cluster configuration is not

supported.

Configuring 3.1 Target